Patton SN200/2JS2V/EUI, 2 FXS to SIP Miniature VoIP Gateway Perfect Sale Online

Patton SN200/2JS2V/EUI, 2 FXS to SIP Miniature VoIP Gateway

Connect with confidence using the SmartNode SN200/2JS2V/EUI Series, legacy telephony equipment to nowadays common SIP trunk and hosted services. The SN200 Series support a variety of telephony interfaces, from 1 to 4 simultaneous calls. Depending on the model, there are FXS and FXO ports available for survivability or number portability during the All-IP migration phase. Designed for professional network deployments, the SN200 provides Telco Operators and Enterprise users a cost-effective solution integrating legacy phones, fax and metering machines in to an All-IP Network. Orchestrated by the Patton Cloud, the Capex associated with deployment, operation and management of the SN200 is the lowest in the market. Secure Zero touch, mass provisioning is standard and included in every SN200 model.

Key Features

• Up to 4 Analog Interfaces (FXS/FXO)
• Advanced Calling Features
• Full VoIP protocol support
• Lowest OPEX
• Survivability & Local Breakout
• Easy Management & Provisioning
• Small Form Factor & PoE Powered
• Outstanding Interoperability

Technical Specifications

Call Capacity
Up to 4 simultaneous G.722 or G.711 or T.38 fax calls
Voice Signaling
SIPv2 & SIPv2 over TCP
SIPv2 TLS**
SIPv2 over IPv6
SIP call transfer, redirect
Overlap or en-bloc dialing
DTMF in-band, out-of-band
Configurable tones Call Routing & Services
Regular expression number matching
Regular expression number manipulation
Least Cost Routing
Number blocking
Short-Dialing
Digit collection
Distribution-Groups and Hunt-Groups
FXS Connectivity
FXS ports, RJ-11/12
2-wire Loopstar
Programmable AC impedance, feeding, ring and onhook voltage
Caller-ID FSK and ITU V.23/Bell 202 generation
5 REN load on FXS port
FXO Connectivity
2-wire Loopstart RJ11/12
Programmable impedance
Ring detection, tone detection
Caller ID detection (FXS, DTMF)
Disconnect supervision
Voice Processing
G.722, G.711m/A-law
729ab (8 kbps)
G.726 (16, 24, 32 Kbps)
G.168-2004 echo cancellation (64 ms)
Up to 4 simultaneous low bandwidth, high definition voice or T.38 fax calls
Silence suppression and comfort noise
Adaptive and configurable dejitter buffer
Configurable RTP packet length
Quality of Service: IEEE 802.1p, IEEE 802.1Q, 4096 VLANs (tag insertion/deletion), TOS, DiffServ labeling
Connectivity
One 10/100 Base-T Ethernet port (depending on Model – optional PoE powered IEEE 802.3af Class 2)
Auto-MDIX
DHCP Client (IPv4 & IPv6)
PPPoE Client (multi-session)
IP Multi-Netting, VLAN, Secondary IP
IPv4 & IPv6 Dual Stack
ICMP
Dynamic and static NAT and NAPT
Access Control List (ACL)
DNS, DynDNS
DHCP Server
SNTP Client
Management
Patton Cloud managed
Web/HTTPS, CLI with Telnet and SSH access
Web Wizard
Fully Documented CLI
Telnet and HTTPs access
TR-069***, TFTP, HTTP, HTTPS configuration/firmware up- and download
SNMPv3 agent
Separate config domain (LAN side config and WAN side config)
MIB II and private MIB
Built-in diagnostic tools
Secure Auto-Provisioning with built in root CA
Dimensions & Weight
1 Port
Weight
2.4 oz (68g)
Dimensions (HxWxD)
3.8 x 1.65 x 0.75″ (9.7 x 4.2 x 1.9cm)
2&4 Port
Weight
3.2oz (90g)
Dimensions (HxWxD)
1.5 x 4.13 x 3.75″ (3.81 x 10.5 x 9.53cm)
Power
1 port
110-230 VAC (50/60 Hz) – 3 Watts
2&4 port
110-230VAC (50/60 Hz) – 7 Watts or PoE: IEEE 802.3af Class 2